Make sure all firewalls are disabled or correct configured.

The bottom bar of the main window should now confirm that the server runs

Start the Service and close this window.

Once installed download the latest Firmware from the Cisco website.Open Solarwinds TFTP server go to File -> Configure and set the TFTP Root Server Directory to the folder you have placed the Firmware files.

Before you start make sure you have a TFTP client installed on your PC, if not you can use Solarwinds TFTP Server.

Update the Switch to the latest firmware and boot code.

Again we cannot take over responsibility for products not made by us Take the Netgear 4300 series instead, they’re at least made for SDVoE, which has the same requirements as Dante. We do not recommend using SG350 and SG550 series switches as firmware quality varies widely.

If the switch still is flooded an additional setting can be done under Multicast – Unregistered Multicast.Īctivate filtering of all unregistered multicast.ĭisclaimer: Genesis Technologies cannot test every firmware from Cisco, so the following settings may or may not work.Multicast -> IPv4 Multicast Configuration -> IGMP VLAN Settings.Select VLAN 20 and hit Edit for additional settings.In Multicast -> IPv4 Multicast Configuration ->IGMP Snooping activate IGMP Snooping Status and IGMP Querier Status.Activate for IPV4 the forwarding method IP Group Address Under Multicast -> Properties activate Bridge Multicast Filtering Status and select the VLAN in the drop down.

Log in to the switch and go to VLAN Management -> VLAN Settings, create a VLAN for the Swisscom devices.VLAN 20 is used for all Swisscom TV data.Swisscom TV box on port 7 and 8 of the switch.Swisscom router which connects to port 6 of the switch.The Cisco Small Business line of switches works usually very well for residential installations, for Swisscom TV they need a special configuration.Īs specifications can change, this howto may only be a guideline, is has no intention to be absolutely correct. Looking to larger installs, specially in the residential area, this setup structure is often not an option as the complete in-house network is managed by a IT company or it has a network structure which does not follow the Swisscom guidelines. Using Swisscom TV in small environments is rather easy, just connect all Swisscom TV boxes into the Swisscom router and you are ready to go.

Easy serial driver control4 login